ENCAD T-200 User Manual download pdf (Page 19)

T-200+ Technical Guide

To assign your IP address and Subnet Mask, choose TCP/IP from the configuration tree

on the left. Assign 192.168.254.200 for the IP address. Assign 255.255.255.0 for the

Subnet Mask. Leave the Gateway blank or zeros. See figure below. Important – Do not

check the DHCP setting (shown checked below) or conflicts with addressing will occur.

Close the InterCon-NetTool. Your setting will be saved in the print server. You are now

ready to setup the Windows Printer Port.

WINDOWS PRINTER PORT SETUP

1. Select Start, Settings, Printers.

2. Add Printer, Next.

3. Select Local Printer.

4. Under Manufactures select Generic and Generic/Text Only for Printer.

5. Accept the default for the name and choose no to print a test page.

Once the printer is setup- Right Click over the printer icon you just setup.

Select Properties. Select the Details tab from the Properties dialog box.

See figure below.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 98 99

No comments

ENCAD T-200 User Manual Page 19