ENCAD T-200 Troubleshooting Guide Page 31
- Page / 91
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Printer Setup 1-22
ENCAD
®
T-200
TM
Reference Guide
This file sets the path to the driver location. The ENCAD ADI driver installation
will modify this file to point to the ENCAD directory. The original file will be saved
to a file called ACADINI.000. If the original file needs to be restored, simply
delete the modified ACAD.INI file and change the ACADINI.000 file name back to
ACAD.INI. (AutoCAD 12 and 13 DOS only) The name and path of the batch file
that starts AutoCAD. Typically, the name of the file is ACADR12.BAT or
ACADR13.BAT and is stored in the root: C:\ or in the AutoCAD directory:
C:\ACAD or C:\R13\DOS. The original file will be saved to a file called
ACADR12.000 or ACADR13.000 and can be restored if necessary by deleting
the modified ACADR*.bat and renaming the ACADR*.000 to ACADR*.BAT.
• The directory where the ACADR*.LSP file is stored. This file loads certain
Autolisp routines and other functions when AutoCAD is launched.
The ENCAD ADI driver installation will modify this file so that the ENCAD ADI
driver will be automatically loaded with each session of AutoCAD.
6 After successfully installing the ENCAD ADI Driver, start AutoCAD.
Details on configuring the driver are included on the CD-ROM.
Network considerations
If your printer is connected to a network, you will want to use the optional Encad print
server which includes hardware and software components. It is a high-performance
compact print server that plugs directly into the parallel port of the printer. It supports
100baseT Fast Ethernet. For installation and configuration information, refer to the
documentation provided with the print server.
Making a test print
The CD included with your system contains sample images. After installing the soft-
ware, try printing one of the images.
Canceling a print
To cancel a print, first send a cancel order from your computer using the appropriate
command for your software application. For example, you can delete the file in the Print
Manager/Print Options. To clear the buffer after cancelling a print, press Reset on the
printer's control panel.
- Printer Reference Guide 1
- WARRANTY CLAIMS 2
- FCC Statement (U.S.A.) 3
- VDE statement 4
- Industry Canada 4
- Material safety data sheet 4
- General operating safety 5
- Manual conventions 5
- Other reference materials 6
- Contents 7
- EFERENCE GUIDE 8
- Printer setup 1 10
- Printing 11
- Obtaining quality results 11
- Use the right inks and media 11
- Choose the right media 12
- Caring for your media 13
- Use the right software 13
- Status LEDS 14
- Selection 14
- Choosing menu functions 15
- Setting the language 15
- To choose a language 15
- To choose supply type 15
- Loading media 16
- To load media 16
- Feed media 16
- To feed media 16
- Moving the carriage 17
- To move the carriage 17
- Installing the cutter 17
- To install the cutter 17
- ➪ To print the color test 18
- Printing the prime pattern 19
- To print the prime pattern 19
- Clogged jets 20
- Cleaning jets 21
- To use the clean function 21
- Manual jet compensation 21
- Aligning the ink cartridges 22
- Performing color calibration 24
- To perform color calibration 24
- Paper axis calibration 25
- Cartridge recognition 26
- Installing software 27
- Windows driver 27
- To install the Windows driver 27
- HDI version 6 and 7 drivers 28
- ADI driver 29
- To install the ADI driver: 30
- Network considerations 31
- Making a test print 31
- Canceling a print 31
- Printer options 2 32
- LED display 33
- Printing the settings 34
- Choosing print mode options 34
- Color mode 35
- To choose the color mode 35
- Quality modes 35
- To choose print quality 36
- Resolution 36
- To choose resolution 36
- Choosing paper options 37
- Media supply 37
- Media standard 37
- To choose the media standard 37
- Printer Options 2-7 38
- Reference Guide 38
- Printer Options 2-8 39
- Printer Options 2-9 40
- Printer Options 2-10 41
- Printer Options 2-11 42
- To set margins 43
- Auto-Cut 43
- To set Auto-Cut 43
- Save Media 43
- To turn off Save Media 43
- Auto-Wipe 44
- To turn off the wiper 44
- Defining user setup 44
- To save user setup 44
- Defining units of measure 45
- To choose measurement units 45
- Choosing a language 45
- ➪ To set the ink preheat time 46
- ➪ To set the dry time 47
- Printer Default Settings 48
- Printing a file 49
- Heidi driver 49
- Device and document settings 50
- Custom properties 51
- Printing 3-4 52
- Stopping printing 54
- Spooling 54
- HP-GL/2 options 4 55
- Accessing HP-GL/2 features 56
- To access HP-GL/2 features 56
- Palette select 56
- To choose a palette type 56
- ➪ To set control 57
- To rotate the image 58
- Ink reduction 58
- To set ink reduction 58
- Rotation 58
- Reprints 59
- To make multiple prints 59
- ➪ To enable nesting 60
- Nest time 61
- To define nesting time 61
- Ink limit 61
- To enable the ink limit 61
- HP-GL/2 Test File 62
- To print the test file 62
- Acceptable DIMM sizes 63
- DIMM installation 63
- To remove the right cover 64
- To remove the DIMMs 64
- ➪ To install the new DIMM 65
- Menu tree B 66
- Setup menu at a glance 67
- Setup menu 68
- User Setup 69
- Ink Options 69
- Utility menu at a glance 70
- Utility menu 70
- Color Calib 71
- Db Calib 71
- Paper Calib 71
- Display Settings 71
- Print Settings 72
- Service Menu 72
- Open Jets 72
- Technical information C 73
- Technical information C-2 74
- REFERENCE GUIDE 74
- Cartridge errors 75
- Memory Errors 76
- Troubleshooting E 77
- Printer Health 78
- Encoder Strip 80
- Trailing Cable Shelf 80
- Data Transfer 86
- Application Software 88
- Calling for Help 90
- Customer Technical Support 91
© 2020, manymanuals.com. All rights reserved. | 0.847 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals