ENCAD T-200 Service Manual download pdf (Page 108)

ENCAD T-200 and T-200+ Service Manual

Assembly\Disassembly 5-6

To remove the MPWA:

1. Put on an ESD wrist strap.

2. Use a #2 6” Phillips screwdriver to remove the three remaining

screws holding the MPWA onto the side plate. See Figure 5-2 for

locations. Hold the top of the MPWA while removing the screws.

3. Place the MPWA in an ESD bag (anti-static bag) in preparation

for shipment to ENCAD for replacement or repair, or if it is to be

stored for repair at your facility.

Removing the Right Side Plate

Figure 5-3. Removal of the Right Side Plate.

To remove the Right Side Plate:

1. Remove the Top Cover.

2. Remove the Right Cover Assembly.

3. Disconnect the MPWA connections and remove the MPWA.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 161 162

No comments

ENCAD T-200 Service Manual Page 108